Peel and Stick Wood-Look Vinyl Flooring
Self-Adhesive LVT Flooring for Fast Indoor Renovation Projects
Renovate residential and light-commercial interiors efficiently with our peel and stick wood-look vinyl flooring. The planks combine realistic wood-grain designs with a factory-applied adhesive backing, allowing installation over suitable smooth, clean, dry and stable indoor subfloors.
The flooring is suitable for rental-property upgrades, bedrooms, living rooms, offices, retail displays, RV interiors and other renovation projects where fast installation and convenient routine maintenance are required.
Product Specifications
| Product Name | Peel and Stick Wood-Look Vinyl Flooring |
|---|---|
| Product Category | Self-Adhesive LVT / PVC Flooring |
| Available Thickness | 1.5mm / 2.0mm, subject to final order confirmation |
| Installation Type | Factory-Applied Self-Adhesive Backing |
| Surface Design | Wood-Grain Print with Embossed Texture |
| Surface Appearance | Matte or Low-Gloss Finish |
| Wear Resistance Result | T/P, as stated on the supplied technical data sheet |
| Slip Resistance | R9 or higher |
| Fire Classification | B1 (B-s1), as stated on the supplied data sheet |
| Formaldehyde Test | N.D. — Not Detected |
| Recommended Subfloor | Smooth, flat, clean, dry and structurally stable indoor surfaces |
Technical Data
| Performance | Test Method | Requirement | Result |
|---|---|---|---|
| Length and Width | GB/T 4085-2015 |
Nominal deviation: −0.13% to +0.13% Individual piece deviation: within ±0.4mm |
Pass |
| Total Thickness | GB/T 4085-2015 |
Nominal deviation: −0.10mm to +0.13mm Individual piece deviation: −0.15mm to +0.15mm |
Pass |
| Wear Layer Thickness | GB/T 4085-2015 |
Nominal deviation: −10% to +13% Individual piece deviation: ≤0.10mm |
Pass |
| Wear Resistance | GB/T 4085-2015 | — | T/P |
| Squareness | GB/T 4085-2015 | ≤0.35mm | Pass |
| Straightness | GB/T 4085-2015 | ≤0.35mm | Pass |
| Dimensional Stability After Heating | GB/T 4085-2015 |
Width-wise: 0.25% Length-wise: 0.25% |
Pass |
| Curling After Heating | GB/T 4085-2015 | ≤2mm | Pass |
| Residual Indentation | ISO 24343-1 | ≤0.10mm | Pass |
| Color Fastness | GB/T 4085-2015 | ≥6 | Pass |
| Slip Resistance | DIN 51130 | ≥R9 | Pass |
| Volatile Organic Compounds | GB 18586-2001 | ≤10g/m² | Pass |
| Residual Vinyl Chloride Monomer Content | GB 18586-2001 | ≤5mg/kg | N.D. — Not Detected |
| Heavy Metal Content | GB 18586-2001 | Soluble lead and cadmium: ≤20mg/m² | N.D. — Not Detected |
| Formaldehyde Content | GB 18580-2001 | ≤1.5mg/L | N.D. — Not Detected |
| Stain Resistance | GB/T 17657-2013 | No observable surface change | Pass |
| Fire-Retardant Classification | GB 8624-2012 | — | B1 (B-s1) |
Key Features and Benefits
Realistic Wood Appearance
Printed wood-grain designs and embossed surface textures create a warm decorative appearance for residential and commercial renovation projects.
Fast Self-Adhesive Installation
The factory-applied adhesive backing eliminates separate wet adhesive application for suitable indoor subfloors.
Dimensional Stability
The supplied test sheet records passing results for dimensional stability, straightness, squareness and heat curling.
Low Residual Indentation
Residual indentation passes the stated requirement of no more than 0.10mm under ISO 24343-1.
Stain-Resistant Surface
Testing records no observable surface change under the stated stain-resistance requirement.
Water-Resistant PVC Surface
The PVC surface is resistant to routine spills and damp cleaning. However, the completed self-adhesive installation should not be treated as a fully waterproof system.
R9 Slip Resistance
The flooring passes the supplied DIN 51130 requirement of R9 or higher.
Controlled Chemical Emissions
Residual vinyl chloride monomer, heavy metals and formaldehyde were reported as not detected in the supplied test data.
Installation Steps
1. Inspect the Subfloor
Confirm that the surface is structurally stable, level, smooth and free from cracks, loose material or excessive moisture.
2. Clean and Dry
Remove dust, oil, wax, grease and other contaminants that could reduce adhesive bonding strength.
3. Plan the Layout
Measure the room, establish reference lines and dry-lay several pieces before removing the backing film.
4. Peel and Position
Remove the release paper gradually, align the plank carefully and avoid touching or contaminating the adhesive surface.
5. Press and Roll
Press the flooring firmly and use a suitable hand roller or flooring roller to ensure full adhesive contact.
6. Protect After Installation
Avoid washing, dragging furniture or applying concentrated loads until the adhesive has achieved adequate bonding.
Recommended Applications
- Bedrooms, living rooms and home offices
- Rental-property and apartment renovation
- Retail displays and temporary commercial decoration
- Offices and other light-commercial interiors
- RV, caravan and mobile-home interiors
- Dry kitchen and laundry areas with properly prepared subfloors
- DIY furniture, cabinet and decorative surface projects